3-axle tipper semi-trailer with Hardox body

• Total weight 35,000 kg.
• Technical fifth-wheel load 11,000 kg.
• Technical axle load 3 x 9,000 kg.

• Overall length approx. 11,680 mm.
• Width (internal) approx. 2,390 mm.
• Body height (internal) approx. 2,400 mm.
• Overall height approx. 3,930 mm.
• Loading height approx. 1,530 mm with fifth-wheel height 1,150 mm.
• B dimension 12,000 mm.
• Loading volume approx. 67 m³.

• Welded steel frame construction in a weight-optimised lightweight design.

• Premium high-pressure front press for rear tipping.
• Tipping angle approx. 46 degrees.

• Body made from high-strength, fine-grained special steel HB 450.
• Horizontally profiled side walls 4 / 3 mm.
• Upper stabilising frame.
• Floor thickness 5 mm.
• Front and rear walls vertical and flush for roll-up tarpaulin.
• Fixed tarpaulin support over front and rear walls with slope.
• Rear wall: 3 mm double door with central split.
• One external twist-lock fastener.
• Fixing for open doors.
• Additional pneumatic safety lock, operated from the side.

Optional version

• Tilting body in reinforced steel design.
• Floor assembly with stringers.
• 6 mm HARDOX floor plate.
• Tipping shaft at the rear with bearings.
• Side walls in frame construction made from 4 mm HARDOX.
• Double-leaf rear wall with external twist-lock fasteners.
• Tilt cylinder mounted externally on straight front wall.
• Access ladder on the front wall.
• Front wall at the same height as the side walls.
• Continuously welded frames on the side walls.

• 3 premium SAF or BPW axle assemblies, each with a technical load capacity of 9 t.
• Disc brakes.
• First axle liftable.
• Control system in accordance with legal requirements.

• Air suspension with automatic lowering during tipping.

• 6-wheel configuration with tyres of size 385/65 R22.5 with ET 120 or ET 0.

• Electronic braking system including stability control.
• Spring-loaded parking brake.
• Electronic air suspension with automatic lowering mechanism and lift/lowering control.
• Wabco SmartBoard for reading mileage, axle load and brake diagnostics.

• Two-speed support jacks for a 24 t support load.
• With thrust compensation.
• Rear support leg cross-member.

• 24-volt lighting system in accordance with EC Directives 76/756/EEC.
• Lighting system in accordance with StVZO.
• ASPÖCK premium components.
• LED ECOLED III integrated into the underrun protection on the left and right.

• 6 PVC full-shell mudguards with mud flaps and splash guards in front of the rear wheels.
• Fitting of the supplied wheel chocks.
• Foldable underrun protection.
• Side marker lights.
• 1 spare wheel holder.
• 1 PVC toolbox.
• Side protection.

• Certified paintwork in accordance with DIN 50017KK.
• Technology and Innovation Ltd.
• Austrian Research Institute for Chemistry and Technology.
• In accordance with DIN 50017KK, condensation test climate on the test bench.
• Passed 750-hour salt spray test with distinction.

• Pressure relief valve on press.
• Platform on the front wall, access on the right.
• Roll-up tarpaulin.
• 4 tensioning straps on the right.
• One tarpaulin tube in the centre.
• 3 tarpaulin stops on the right.